Written by Head Carbide
|
|
5 pieces 10MM ( 3/8″ head ) Tungsten Carbide Rotary Burr point 1/4″ shank $29.99 |
|
|
IR 8 Piece Carbide Burr 1/4″ Shank 1/2″ Head $123.99 |
|
|
10 pieces 6mm (1/4″) head Tungsten Carbide Rotary Burr points SET 3/32″ shank $19.99 |
|
|
Midwest Triangle Head Carbide Sander: Fine Grit MID1173 $6.69 |
|
|
DeVlieg TSD Microbore cartridge CB24F 2PC carbide tipped boring head tool NOS (C $14.99 |
|
|
DeVlieg TSD Microbore cartridge C5A24F 1PC carbide tipped boring head tool NOS(D $9.99 |
|
|
USED 3/8″ SOLID CARBIDE COOLANT THRU BORING BAR SHANK (BARE TOOL, NO HEAD) $41.75 |
|
|
DREMEL TUNGSTEN CARBIDE CUTTER#9906 ROUND HEAD $14.00 |
|
|
Grobet Carbide Burr 14 degree cone 1/2″head SL-4 $11.50 |
|
|
Cone Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 8mm Head Diameter $0.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 10mm Head Dia. $0.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 8mm Head Dia. $0.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 6mm Head Dia. $0.99 |
|
|
Cone Tungsten Carbide Rotary Burr Grinding Carving Tool 6mm Head Diameter #5134 $0.99 |
|
|
5pcs Kit Carbide Rotary Burrs, 1/4″ Shank, Small Head $39.00 |
|
|
RED HEAD CARBIDE DRILL BIT #384-K 3/8″ X 6″ – NEW $39.91 |
|
|
Midwest Round Head Carbide Sander: Medium Grit MID1177 $6.69 |
|
|
BULLET Head Double Cut 10mm Tungsten Carbide Rotary Burr 150MM (6″) SHANK $12.99 |
|
|
Cylindrical Rd Head Double Cut 10mm Tungsten Carbide Rotary Burr 150MM SHANK $12.99 |
|
|
TAPER-Double Cut Head 10mm Tungsten Carbide Rotary Burr 150MM (6″) SHANK $12.99 |
|
|
10 Pcs/set 6mm Head Set Tungsten Carbide Rotary Burr SET 3/32″ Shank $19.99 |
|
|
10 Pcs/set Burrs Tungsten Carbide Rotary (3mm Head) Set 1/8 (3mm) Shank Cutter $17.99 |
|
|
10 Pcs/set 6mm Head Set Tungsten Carbide Rotary Burr 1/8″ 3mm Shank $19.99 |
|
|
_60DT (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_TORCH (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_LADDER (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_90DT (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_Cyl. Round Head (12mm) Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_BALL (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_POINTED TREE (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_TAPER (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_Cyl. End Cut (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
RED HEAD 747-30 Roto Stop Hammer drill. 6 carbide bits. 5 chuck heads. Accessory $200.00 |
|
|
Replacement Carbide Wheel Glass Cutter Head Blade Black $5.18 |
|
|
Glass Cutting Tool Carbide Wheel U Type Cutter Head Blk $5.16 |
|
|
K-TOOLS COUNTERBORE FOR 1/2″ SOCKET HEAD CAP SCREWS CARBIDE INSERTS A889 $99.99 |
|
|
Carbide Cutting Wheel Blade Glass Cutter Heads 2 Pieces $3.93 |
|
|
Carbide Generator Brass Rushmore head search light Stanley Steamer Model T era $1,399.99 |
|
|
(8MM) – Cylindrical Round Head Double Cut Tungsten Carbide Rotary Shank 1/4″ $6.99 |
|
|
(8MM) Head – 90DT Double Cut Tungsten Carbide Rotary Burr 1/4″ Shank $6.99 |
|
|
(8MM) Head – 60DT Double Cutter Cut Tungsten Carbide Rotary Burr 1/4″ Shank $6.99 |
|
|
(8mm) – BALL Head Double Cut Tungsten Carbide Rotary Burr 1/4″ Shank $6.99 |
|
|
(BALL)- Head Double Cut 10mm Tungsten Carbide Rotary Burr 1/4″ Shank $7.99 |
|
|
(Cylindrical Round Head)- Double Cut 10mm Tungsten Carbide Rotary Shank 1/4″ $7.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 6mm Head Dia. $6.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 8mm Head Dia. $7.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 10mm Head Dia. $7.99 |
|
|
Cone Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 8mm Head Diameter $7.99 |
|
|
Vintage brass carbide head lamp for Indian Harley Henderson Excelsior $70.95 |
|
|
5/16″ x 1/5″ Carbide Spear Head Glass Marble Tile Drill Bit $4.51 |
|
|
Outdoor Edge TC-100 Tungsten Carbide Sharpener Reshapes a Razor Sharp Edge in Seconds with V-Shaped Tungsten Carbide Cutting Heads $6.59 Carbide Sharpener… |
|
|
CarBee-Sharp Multi-Head Pocket Carbide Sharpener CarBee-Sharp Multi-Head Pocket Carbide Sharpener… |
|
|
Carbide Bit Gold. Barrel shape Gold carbide, good for smoothing and shaping the top surface of gel and wraps. Comes in either small or big head. Depending on the application, two different stem sizes are available: Made in U.S.A * 1/8″ – for use with Dremel 257 and 332 drills. * 3/32″ – for use with UP 200/220 and VIP 2000/3000/4000 drills….. |
|
|
Carbide Bit Silver Small Barrel (Med) 3/32. $9.50 Barrel shape silver (Med) carbide, good for smoothing and shaping the top surface of gel and wraps. Comes in either small or big head. Depending on the application, two different stem sizes are available: Made in U.S.A * 1/8″ – for use with Dremel 257 and 332 drills. * 3/32″ – for use with UP 200/220 and VIP 2000/3000/4000 drills….. |
|
|
Carbide Bit Silver Small Barrel 3/32. $9.50 Barrel shape silver carbide, good for smoothing and shaping the top surface of gel and wraps. Comes in either small or big head. Depending on the application, two different stem sizes are available: Made in U.S.A * 1/8″ – for use with Dremel 257 and 332 drills. * 3/32″ – for use with UP 200/220 and VIP 2000/3000/4000 drills….. |
|
|
Wiha 32716 Bevel Wide Oval Head Precision Cutters $27.52 Precision ESD Side Cutters With Oval HeadsSide Cutters Wide Oval Head Bevel ? Handles are Dissipative? Mirror Polished Finish,? Welded leaf-spring Design? Ergonomic Shape, With Soft Comfort Grip Surface? Drop Forged With Induction Hardened Cutting Edges, ? Made In GermanyMade in Germany by: Wiha Quality Toolswhich offers a lifetime guarantee on most all of their tools…. |
|
|
Round Head Carbide Sander: Medium Grit $7.99 … |
|
|
Triangle Head Carbide Sander: Medium Grit $5.44 Triangle Head Carbide Sander: Medium GritMidwestPart MID1178… |
|
|
… |
|
|
Wiha 26194 Screwdriver Set, Phillips With Precision Handles, 4 Piece $12.50 Phillips Precision 261 Series 4 Pc. Standard Set.Phillips – 000, 00, 0, 1. Exact Fit Precision Machined Tips. Wiha High Performance CRM72 Tool Steel Blades. Through hardened for optimum torque performance Micron Vapor Hard Chromed finish. Handles Proportioned to Blade Size Slim & tapered. Finger Control Cap for precise turning. Guaranteed Quality – Made in Germany…. |
|
|
5 pieces 10MM ( 3/8″ head ) Tungsten Carbide Rotary Burr point 1/4″ shank $29.99 |
|
|
IR 8 Piece Carbide Burr 1/4″ Shank 1/2″ Head $123.99 |
|
|
10 pieces 6mm (1/4″) head Tungsten Carbide Rotary Burr points SET 3/32″ shank $19.99 |
|
|
Midwest Triangle Head Carbide Sander: Fine Grit MID1173 $6.69 |
|
|
DeVlieg TSD Microbore cartridge CB24F 2PC carbide tipped boring head tool NOS (C $14.99 |
|
|
DeVlieg TSD Microbore cartridge C5A24F 1PC carbide tipped boring head tool NOS(D $9.99 |
|
|
USED 3/8″ SOLID CARBIDE COOLANT THRU BORING BAR SHANK (BARE TOOL, NO HEAD) $41.75 |
|
|
DREMEL TUNGSTEN CARBIDE CUTTER#9906 ROUND HEAD $14.00 |
|
|
Grobet Carbide Burr 14 degree cone 1/2″head SL-4 $11.50 |
|
|
Cone Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 8mm Head Diameter $0.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 10mm Head Dia. $0.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 8mm Head Dia. $0.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 6mm Head Dia. $0.99 |
|
|
Cone Tungsten Carbide Rotary Burr Grinding Carving Tool 6mm Head Diameter #5134 $0.99 |
|
|
5pcs Kit Carbide Rotary Burrs, 1/4″ Shank, Small Head $39.00 |
|
|
RED HEAD CARBIDE DRILL BIT #384-K 3/8″ X 6″ – NEW $39.91 |
|
|
Midwest Round Head Carbide Sander: Medium Grit MID1177 $6.69 |
|
|
BULLET Head Double Cut 10mm Tungsten Carbide Rotary Burr 150MM (6″) SHANK $12.99 |
|
|
Cylindrical Rd Head Double Cut 10mm Tungsten Carbide Rotary Burr 150MM SHANK $12.99 |
|
|
TAPER-Double Cut Head 10mm Tungsten Carbide Rotary Burr 150MM (6″) SHANK $12.99 |
|
|
10 Pcs/set 6mm Head Set Tungsten Carbide Rotary Burr SET 3/32″ Shank $19.99 |
|
|
10 Pcs/set Burrs Tungsten Carbide Rotary (3mm Head) Set 1/8 (3mm) Shank Cutter $17.99 |
|
|
10 Pcs/set 6mm Head Set Tungsten Carbide Rotary Burr 1/8″ 3mm Shank $19.99 |
|
|
_60DT (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_TORCH (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
