Written by Head Carbide
|
|
5 pieces 10MM ( 3/8″ head ) Tungsten Carbide Rotary Burr point 1/4″ shank $29.99 |
|
|
IR 8 Piece Carbide Burr 1/4″ Shank 1/2″ Head $123.99 |
|
|
10 pieces 6mm (1/4″) head Tungsten Carbide Rotary Burr points SET 3/32″ shank $19.99 |
|
|
Midwest Triangle Head Carbide Sander: Fine Grit MID1173 $6.69 |
|
|
DeVlieg TSD Microbore cartridge CB24F 2PC carbide tipped boring head tool NOS (C $14.99 |
|
|
DeVlieg TSD Microbore cartridge C5A24F 1PC carbide tipped boring head tool NOS(D $9.99 |
|
|
USED 3/8″ SOLID CARBIDE COOLANT THRU BORING BAR SHANK (BARE TOOL, NO HEAD) $41.75 |
|
|
DREMEL TUNGSTEN CARBIDE CUTTER#9906 ROUND HEAD $14.00 |
|
|
Grobet Carbide Burr 14 degree cone 1/2″head SL-4 $11.50 |
|
|
Cone Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 8mm Head Diameter $0.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 10mm Head Dia. $0.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 8mm Head Dia. $0.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 6mm Head Dia. $0.99 |
|
|
Cone Tungsten Carbide Rotary Burr Grinding Carving Tool 6mm Head Diameter #5134 $0.99 |
|
|
5pcs Kit Carbide Rotary Burrs, 1/4″ Shank, Small Head $39.00 |
|
|
RED HEAD CARBIDE DRILL BIT #384-K 3/8″ X 6″ – NEW $39.91 |
|
|
Midwest Round Head Carbide Sander: Medium Grit MID1177 $6.69 |
|
|
BULLET Head Double Cut 10mm Tungsten Carbide Rotary Burr 150MM (6″) SHANK $12.99 |
|
|
Cylindrical Rd Head Double Cut 10mm Tungsten Carbide Rotary Burr 150MM SHANK $12.99 |
|
|
TAPER-Double Cut Head 10mm Tungsten Carbide Rotary Burr 150MM (6″) SHANK $12.99 |
|
|
10 Pcs/set 6mm Head Set Tungsten Carbide Rotary Burr SET 3/32″ Shank $19.99 |
|
|
10 Pcs/set Burrs Tungsten Carbide Rotary (3mm Head) Set 1/8 (3mm) Shank Cutter $17.99 |
|
|
10 Pcs/set 6mm Head Set Tungsten Carbide Rotary Burr 1/8″ 3mm Shank $19.99 |
|
|
_60DT (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_TORCH (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_LADDER (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_90DT (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_Cyl. Round Head (12mm) Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_BALL (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_POINTED TREE (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_TAPER (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_Cyl. End Cut (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
RED HEAD 747-30 Roto Stop Hammer drill. 6 carbide bits. 5 chuck heads. Accessory $200.00 |
|
|
Replacement Carbide Wheel Glass Cutter Head Blade Black $5.18 |
|
|
Glass Cutting Tool Carbide Wheel U Type Cutter Head Blk $5.16 |
|
|
K-TOOLS COUNTERBORE FOR 1/2″ SOCKET HEAD CAP SCREWS CARBIDE INSERTS A889 $99.99 |
|
|
Carbide Cutting Wheel Blade Glass Cutter Heads 2 Pieces $3.93 |
|
|
Carbide Generator Brass Rushmore head search light Stanley Steamer Model T era $1,399.99 |
|
|
(8MM) – Cylindrical Round Head Double Cut Tungsten Carbide Rotary Shank 1/4″ $6.99 |
|
|
(8MM) Head – 90DT Double Cut Tungsten Carbide Rotary Burr 1/4″ Shank $6.99 |
|
|
(8MM) Head – 60DT Double Cutter Cut Tungsten Carbide Rotary Burr 1/4″ Shank $6.99 |
|
|
(8mm) – BALL Head Double Cut Tungsten Carbide Rotary Burr 1/4″ Shank $6.99 |
|
|
(BALL)- Head Double Cut 10mm Tungsten Carbide Rotary Burr 1/4″ Shank $7.99 |
|
|
(Cylindrical Round Head)- Double Cut 10mm Tungsten Carbide Rotary Shank 1/4″ $7.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 6mm Head Dia. $6.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 8mm Head Dia. $7.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 10mm Head Dia. $7.99 |
|
|
Cone Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 8mm Head Diameter $7.99 |
|
|
Vintage brass carbide head lamp for Indian Harley Henderson Excelsior $70.95 |
|
|
5/16″ x 1/5″ Carbide Spear Head Glass Marble Tile Drill Bit $4.51 |
|
|
Outdoor Edge TC-100 Tungsten Carbide Sharpener Reshapes a Razor Sharp Edge in Seconds with V-Shaped Tungsten Carbide Cutting Heads $6.59 Carbide Sharpener… |
|
|
CarBee-Sharp Multi-Head Pocket Carbide Sharpener CarBee-Sharp Multi-Head Pocket Carbide Sharpener… |
|
|
Carbide Bit Gold. Barrel shape Gold carbide, good for smoothing and shaping the top surface of gel and wraps. Comes in either small or big head. Depending on the application, two different stem sizes are available: Made in U.S.A * 1/8″ – for use with Dremel 257 and 332 drills. * 3/32″ – for use with UP 200/220 and VIP 2000/3000/4000 drills….. |
|
|
Carbide Bit Silver Small Barrel (Med) 3/32. $9.50 Barrel shape silver (Med) carbide, good for smoothing and shaping the top surface of gel and wraps. Comes in either small or big head. Depending on the application, two different stem sizes are available: Made in U.S.A * 1/8″ – for use with Dremel 257 and 332 drills. * 3/32″ – for use with UP 200/220 and VIP 2000/3000/4000 drills….. |
|
|
Carbide Bit Silver Small Barrel 3/32. $9.50 Barrel shape silver carbide, good for smoothing and shaping the top surface of gel and wraps. Comes in either small or big head. Depending on the application, two different stem sizes are available: Made in U.S.A * 1/8″ – for use with Dremel 257 and 332 drills. * 3/32″ – for use with UP 200/220 and VIP 2000/3000/4000 drills….. |
|
|
Techniks CH 85 Chamfer Head 85mm Connection $984.20 Chamfering Head, 85mm connection… |
|
|
15.7 Flat Ribbon Head Cable for Mutoh Printers 21 Pin Flat ribbon cable for Mutoh printers Lenght: 15.7″ (400 mm) Width: 0.87″ (22 mm) 21 Pins Compatibility |
|
|
50 Solvent Cleaning Swabs for Roland Mimaki Mutoh Epson The foam swab is used to clean the heads and capping area of the different printers ( for printing cleaning procedures) Get your car detail with these cleaning swabs – they get the dirt out of tight spaces Each swab measures 5″ long Sponge head measures aproximately 1/4″ wide Head material: High Quality Sponge… |
|
|
Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool – Glass, Stone, Ceramic $1.10 Professional Quality, 1/8 in. Shank, 180 Grit. Includes 20 assorted shapes covered with diamond particles. All bits have 1/8 in. shanks and come in convienient plastic holder. Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials…. |
|
|
Drill Doctor DD750X Drill Bit Sharpener $197.95 Make your work faster and easier while saving yourself money sharpening your dull and broken drill bits with the Drill Doctor 750X 3/32- to 3/4-Inch Drill Bit Sharpener. Designed for the serious tool user, this professional, easy-to-use system makes it simple to keep a sharp, perfectly angled cutting edge on bits you use often, and it can even be used to put an edge back on broken bits. .capti… |
|
|
5 pieces 10MM ( 3/8″ head ) Tungsten Carbide Rotary Burr point 1/4″ shank $29.99 |
|
|
IR 8 Piece Carbide Burr 1/4″ Shank 1/2″ Head $123.99 |
|
|
10 pieces 6mm (1/4″) head Tungsten Carbide Rotary Burr points SET 3/32″ shank $19.99 |
|
|
Midwest Triangle Head Carbide Sander: Fine Grit MID1173 $6.69 |
|
|
DeVlieg TSD Microbore cartridge CB24F 2PC carbide tipped boring head tool NOS (C $14.99 |
|
|
DeVlieg TSD Microbore cartridge C5A24F 1PC carbide tipped boring head tool NOS(D $9.99 |
|
|
USED 3/8″ SOLID CARBIDE COOLANT THRU BORING BAR SHANK (BARE TOOL, NO HEAD) $41.75 |
|
|
DREMEL TUNGSTEN CARBIDE CUTTER#9906 ROUND HEAD $14.00 |
|
|
Grobet Carbide Burr 14 degree cone 1/2″head SL-4 $11.50 |
|
|
Cone Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 8mm Head Diameter $0.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 10mm Head Dia. $0.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 8mm Head Dia. $0.99 |
|
|
Cylinder Tungsten Carbide Rotary Burr Drill Grinding Carving Tool 6mm Head Dia. $0.99 |
|
|
Cone Tungsten Carbide Rotary Burr Grinding Carving Tool 6mm Head Diameter #5134 $0.99 |
|
|
5pcs Kit Carbide Rotary Burrs, 1/4″ Shank, Small Head $39.00 |
|
|
RED HEAD CARBIDE DRILL BIT #384-K 3/8″ X 6″ – NEW $39.91 |
|
|
Midwest Round Head Carbide Sander: Medium Grit MID1177 $6.69 |
|
|
BULLET Head Double Cut 10mm Tungsten Carbide Rotary Burr 150MM (6″) SHANK $12.99 |
|
|
Cylindrical Rd Head Double Cut 10mm Tungsten Carbide Rotary Burr 150MM SHANK $12.99 |
|
|
TAPER-Double Cut Head 10mm Tungsten Carbide Rotary Burr 150MM (6″) SHANK $12.99 |
|
|
10 Pcs/set 6mm Head Set Tungsten Carbide Rotary Burr SET 3/32″ Shank $19.99 |
|
|
10 Pcs/set Burrs Tungsten Carbide Rotary (3mm Head) Set 1/8 (3mm) Shank Cutter $17.99 |
|
|
10 Pcs/set 6mm Head Set Tungsten Carbide Rotary Burr 1/8″ 3mm Shank $19.99 |
|
|
_60DT (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
|
|
_TORCH (12mm) Head Tungsten Carbide Rotary Burr 6mm 1/4″ Shank Double Cut $9.99 |
