Written by Long Roughing
|
|
1/2″ 4 FLUTE LONG LENGTH FINE PITCH TiAlN HSCO ROUGHING END MILL $44.10 |
|
|
1″ 6 FLUTE LONG LENGTH FINE PITCH TiCN HSCO ROUGHING END MILL $97.56 |
|
|
1″ 6 FLUTE EXTRA LONG LENGTH FINE PITCH TiCN HSCO ROUGHING END MILL $103.37 |
|
|
1″ 6 FLUTE EXTRA EXTRA LONG LENGTH FINE PITCH TiCN HSCO ROUGHING END MILL $136.64 |
|
|
1″ 5 FLUTE M42 8% COBALT TiALN ROUGHING LONG END MILL $49.00 |
|
|
1 1/8″- 7 STI HELI COIL ROUGHING TAP 18CRU 5 ¾” LONG $20.00 |
|
|
1 1/8″- 7 STI HELI COIL ROUGHING TAP 18CRU 6″ LONG $20.00 |
|
|
USED ROUGHING END MILL 5 FLUTE M2AL 7/8″ x 3/4″ x 1″ MADE IN CHINA 4-1/8″ LONG $19.99 |
|
|
USED ROUGHING END MILL 5 FLUTE M2AL 7/8″ x 3/4″ x 1″, 3-3/4″ LONG MADE IN CHINA $19.99 |
|
|
USED ROUGHING END MILL 5 FLUTE M2AL 7/8″ x 3/4″ x 1″, 4-1/4″ LONG MADE IN CHINA $19.99 |
|
|
USED ROUGHING END MILL 5 FLUTE M2AL 7/8″ x 3/4″ x 1″, 3-7/8″ LONG MADE IN CHINA $19.99 |
|
|
USED ROUGHING END MILL 5 FLUTE M2AL 7/8″ x 3/4″ x 1″ MADE IN CHINA 4″ LONG $19.99 |
|
|
USED ROUGHING END MILL M2AL 5 FLUTE 7/8″ x 3/4″ x 1″, 4-1/8″ LONG MADE IN CHINA $19.99 |
|
|
USED ROUGHING END MILL 5 FLUTE M2AL 7/8″ x 3/4″ x 1″, 4″ LONG MADE IN CHINA $19.99 |
|
|
USED ROUGHING END MILL 5 FLUTE M2AL 7/8″ x 3/4″ x 1″, 4-1/8″ LONG MADE IN CHINA $19.99 |
|
|
3/4″ Fastcut M4 High Quality HSS 4 Flute Extra Long Roughing Rougher End Mill $17.99 |
|
|
1/2″ 3 Flute Cobalt Long CP 35° Helix Roughing End Mills For Aluminum Melin USA $36.25 |
|
|
1/2″ 3 Flute TiCN Cobalt Long CP 35° Helix Roughing End Mills F/Aluminum Melin $43.99 |
|
|
1/4″ 3 Flute Long Cobalt CP 35° Helix Roughing End Mills For Aluminum Melin USA $20.99 |
|
|
3/4″ 3 Flute Cobalt Long CP 35° Helix Roughing End Mills For Aluminum Melin USA $49.99 |
|
|
3/8″ 3 Flute Long Cobalt CP 35° Helix Roughing End Mills For Aluminum Melin USA $24.45 |
|
|
5/16″ 3 Flute Long Cobalt CP 35° Helix Roughing End Mills For Aluminum Melin USA $25.43 |
|
|
5/8″ 3 Flute Cobalt Long CP 35° Helix Roughing End Mills For Aluminum Melin USA $42.99 |
|
|
New 1″ Cobalt Roughing End Mill 5 Flute M42 LONG $70.00 |
|
|
OSG/Sossner #4701900 7/8″ 5-Flute, Long Roughing Finishing Cobalt Endmill New $85.00 |
|
|
OSG/Sossner #4909200 1/4″ 4-Flute, Long, Roughing Cobalt Endmill New $39.95 |
|
|
OSG/Sossner #4909500 5/16″ 4-Flute, Long, Roughing Cobalt Endmill New $39.95 |
|
|
USA MADE 2″ DIAMETER COBALT ROUGHING LONG BALL END MILL $89.00 |
|
|
OSG/Sossner #4901900 7/8″ 5-Flute, Long Roughing Cobalt Endmill New $99.00 |
|
|
M42 COBALT ROUGHING END MILL 1″ DIAMETER LONG FINE TOOTH CONTROX NEW $22.00 |
|
|
1/8″ Plastic Injection Roughing Sprue Reamer 3.5″ long $110.00 |
|
|
5/32″ Plastic Injection Roughing Sprue Reamer 3.5″ long $99.00 |
|
|
7/32″ Plastic Injection Roughing Sprue Reamer 3.5″ long $99.00 |
|
|
Learn to Turn: A Beginner’s Guide to Woodturning from Start to Finish $10.45 Written for true beginners, this approachable and enjoyable instructional guide teaches the art of turning. Readers receive advice on every step of the turning process, including selecting the right lathe, basic safety and woodshop setup, an overview of the proper tools and how to use them, and the basics on sharpening, sanding, and finishing. Step-by-step instructions for eight projects such as a… |
|
|
A User’s Guide to Vacuum Technology $98.84 In the decade and a half since the publication of the Second Edition of A User?s Guide to Vacuum Technology there have been many important advances in the field, including spinning rotor gauges, dry mechanical pumps, magnetically levitated turbo pumps, and ultraclean system designs. These, along with improved cleaning and assembly techniques have made contamination-free manufacturing a reality. De… |
|
|
Wolf Tales 12 $8.61 The Final Chapter: Gifted with exceptional strength and extraordinary sensuality, the shapeshifting Chanku have learned to survive on their own, far away from their one true home in the mountains of Montana. But as the years pass, the packs begin to long for one another, for the incredible passion they enjoy together and for the erotic pleasure they find only with their own kind…It is then they … |
|
|
… |
|
|
Charlie Rose (June 25, 2002) $1.99 … |
|
|
Charlie Rose (March 26, 2002) $1.99 … |
|
|
Melin Tool ERP-L Cobalt Steel Square Nose End Mill, General Purpose, Uncoated (Bright) Finish, Roughing, 3 Flutes, Center Cutting, 35 Degree Helix Angle, 1-3/8 Cutting Length, 5/16 Cutting Diameter $23.94 Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Weldon shanks feature a round shank with one of more flats machined into the side for easy… |
|
|
Melin Tool CCRP Cobalt Steel Square Nose End Mill, General Purpose, TiCN Coated, Roughing, 4 Flutes, Center Cutting, 30 Degree Helix Angle, 5/8 Cutting Length, 1/2 Cutting Diameter, 0.5 Shank Diameter $21.28 Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alig… |
|
|
7/8 Dia., 7/8 Shank, 3 1/2 Cut Lgth., 5 3/4 OAL, 4 Flute, Coarse Profile, Non Center Cutting, Hanita End Mill (1 Each) $73.04 … |
|
|
Beverly Hills Teens:Roughing It [VHS] $5.99 VHS Video… |
|
|
1/2″ 4 FLUTE LONG LENGTH FINE PITCH TiAlN HSCO ROUGHING END MILL $44.10 |
|
|
1″ 6 FLUTE LONG LENGTH FINE PITCH TiCN HSCO ROUGHING END MILL $97.56 |
|
|
1″ 6 FLUTE EXTRA LONG LENGTH FINE PITCH TiCN HSCO ROUGHING END MILL $103.37 |
|
|
1″ 6 FLUTE EXTRA EXTRA LONG LENGTH FINE PITCH TiCN HSCO ROUGHING END MILL $136.64 |
|
|
1″ 5 FLUTE M42 8% COBALT TiALN ROUGHING LONG END MILL $49.00 |
|
|
1 1/8″- 7 STI HELI COIL ROUGHING TAP 18CRU 5 ¾” LONG $20.00 |
|
|
1 1/8″- 7 STI HELI COIL ROUGHING TAP 18CRU 6″ LONG $20.00 |
|
|
USED ROUGHING END MILL 5 FLUTE M2AL 7/8″ x 3/4″ x 1″ MADE IN CHINA 4-1/8″ LONG $19.99 |
|
|
USED ROUGHING END MILL 5 FLUTE M2AL 7/8″ x 3/4″ x 1″, 3-3/4″ LONG MADE IN CHINA $19.99 |
|
|
USED ROUGHING END MILL 5 FLUTE M2AL 7/8″ x 3/4″ x 1″, 4-1/4″ LONG MADE IN CHINA $19.99 |
|
|
USED ROUGHING END MILL 5 FLUTE M2AL 7/8″ x 3/4″ x 1″, 3-7/8″ LONG MADE IN CHINA $19.99 |
|
|
USED ROUGHING END MILL 5 FLUTE M2AL 7/8″ x 3/4″ x 1″ MADE IN CHINA 4″ LONG $19.99 |
|
|
USED ROUGHING END MILL M2AL 5 FLUTE 7/8″ x 3/4″ x 1″, 4-1/8″ LONG MADE IN CHINA $19.99 |
|
|
USED ROUGHING END MILL 5 FLUTE M2AL 7/8″ x 3/4″ x 1″, 4″ LONG MADE IN CHINA $19.99 |
|
|
USED ROUGHING END MILL 5 FLUTE M2AL 7/8″ x 3/4″ x 1″, 4-1/8″ LONG MADE IN CHINA $19.99 |
|
|
3/4″ Fastcut M4 High Quality HSS 4 Flute Extra Long Roughing Rougher End Mill $17.99 |
|
|
1/2″ 3 Flute Cobalt Long CP 35° Helix Roughing End Mills For Aluminum Melin USA $36.25 |
|
|
1/2″ 3 Flute TiCN Cobalt Long CP 35° Helix Roughing End Mills F/Aluminum Melin $43.99 |
|
|
1/4″ 3 Flute Long Cobalt CP 35° Helix Roughing End Mills For Aluminum Melin USA $20.99 |
|
|
3/4″ 3 Flute Cobalt Long CP 35° Helix Roughing End Mills For Aluminum Melin USA $49.99 |
|
|
3/8″ 3 Flute Long Cobalt CP 35° Helix Roughing End Mills For Aluminum Melin USA $24.45 |
|
|
5/16″ 3 Flute Long Cobalt CP 35° Helix Roughing End Mills For Aluminum Melin USA $25.43 |
|
|
5/8″ 3 Flute Cobalt Long CP 35° Helix Roughing End Mills For Aluminum Melin USA $42.99 |
|
|
New 1″ Cobalt Roughing End Mill 5 Flute M42 LONG $70.00 |
|
|
OSG/Sossner #4701900 7/8″ 5-Flute, Long Roughing Finishing Cobalt Endmill New $85.00 |
