Written by Milling Arbor
|
|
3 Morse Taper 22mm Face Mill / Shell Mill arbor Quality $47.44 |
|
|
Breeched Dam and Old Mill, Ann Arbor, Michigan – 1908 – Historic Photo Print $7.50 |
|
|
1907 Mill and Huron River near Ann Arbor MI postcard $3.95 |
|
|
Cutter arbor for Unimat 3 or Unimat 4 and Compact 5 Milling head $32.83 |
|
|
Stub Milling Machine Arbor 3/4″ Diameter Straight Shank 1 1/4″ Arbor Diameter $65.99 |
|
|
Cincinnati Milling Machine Arbor Support $1,800.00 |
|
|
Cincinnati Milling Machine Arbor Support $1,400.00 |
|
|
Cincinnati Milling Machine Arbor Support Bushing $550.00 |
|
|
NMTB 50 TAPER 1/2″ END MILL HOLDER milling tool arbor $49.00 |
|
|
NMTB 50 TAPER 3/4″ END MILL HOLDER milling tool arbor $49.00 |
|
|
3MT Horizontal Milling Arbor Attachment for Harrison L5 Lathe $34.40 |
|
|
PROTO 2000 HO 52’6 MILL GONDOLA (ANN ARBOR) # 2019 $14.99 |
|
|
PROTO 2000 HO 52’6 MILL GONDOLA (ANN ARBOR) # 2032 $14.99 |
|
|
PROTO 2000 HO 52’6 MILL GONDOLA (ANN ARBOR) # 2058 $14.99 |
|
|
Last USED UNIVERSAL ENGINEERING KWIK SWITCH 300 FACE MILL ARBOR 3/4″ SMA .750″ $39.05 |
|
|
Stub Milling Machine Arbor 3/4″ Diameter Straight Shank 1″ Arbor Diameter $65.99 |
|
|
LOT OF 20-PCS BACK SPOT FACERS- MILL CUTTERS – REVERSE CUTTERS – WITH ARBOR $45.00 |
|
|
LOT OF 12-PCS BACK SPOT FACERS- MILL CUTTERS – REVERSE CUTTERS – WITH ARBOR $40.00 |
|
|
LOT OF 6-PCS – MILL CUTTERS – REVERSE CUTTERS – WITH ARBOR-BACK SPOT FACER $25.00 |
|
|
LOT OF 10-PCS – MILL CUTTERS – REVERSE CUTTERS – WITH ARBOR- BACK SPOT FACER $35.00 |
|
|
LOT OF 13-PCS BACK SPOT FACERS- MILL CUTTERS – REVERSE CUTTERS – WITH ARBOR $46.00 |
|
|
LOT OF 10-PCS BACK SPOT FACERS- MILL CUTTERS – REVERSE CUTTERS – WITH ARBOR $35.00 |
|
|
LOT OF 10-PCS – MILL CUTTERS – REVERSE CUTTERS – WITH ARBOR-BACK SPOT FACER $42.50 |
|
|
SANDVIK VARILOCK 1″ ARBOR SIDE & FACE MILL ADAPTER A391.10-25 63 030 $99.99 |
|
|
SANDVIK VARILOCK 1-1/2″ ARBOR SIDE & FACE MILL ADAPTER A391.10-38 80 030 $99.99 |
|
|
SANDVIK VARILOCK 2″ ARBOR SIDE & FACE MILL ADAPTER A391.10-50 80 030 $124.99 |
|
|
3/4″ R8 SHELL MILL ARBOR HOLDER FOR BRIDGEPORT GROUND NEW $33.95 |
|
|
Ingersoll 4″ Face Mill Indexable Milling Cutter 1 1/2″ Arbor 6-Inserts $89.99 |
|
|
Ingersoll 4″ Face Mill indexable Milling Cutter 1 1/2″ Arbor 6-Inserts $69.99 |
|
|
Ingersoll 4″ Face Mill Indexable Milling Cutter 1 1/2″ Arbor 6-Inserts $99.99 |
|
|
Sandvik Coromant R262.22-100-10-V80 100mm dia Face Mill 32mm Arbor indexable $189.99 |
|
|
Ingersoll 4″ face mill indexable milling cutter 1 1/2″ arbor 8-inserts $89.99 |
|
|
4″ Dia x 3″ High Indexable Face Mill Milling Cutter 1 1/2″ Arbor 21 Inserts $99.99 |
|
|
Ingersoll Rand 4″ Indexable Face Mill Ten LNE434-02 Inserts 1 1/2″ Arbor (06) $169.99 |
|
|
Ingersoll Rand 4″ Indexable Face Mill Ten LNE434-02 Inserts 1 1/2″ Arbor $159.99 |
|
|
Ingersoll Rand 4″ Indexable Face Mill Ten LNE434-02 Inserts 1 1/2″ Arbor $189.99 |
|
|
Ingersoll Rand 4″ Indexable Face Mill Ten LNE434-02 Inserts 1 1/2″ Arbor (03) $169.99 |
|
|
Ingersoll Rand 4″ Indexable Face Mill Ten NEW LNE434-02 Inserts 1 1/2″ Arbor $249.99 |
|
|
Ingersoll Rand 4″ Indexable Face Mill Ten LNE434-02 Inserts 1 1/2″ Arbor $179.99 |
|
|
Ingersoll Rand 4″ Indexable Face Mill Ten LNE434-02 Inserts 1 1/2″ Arbor (08) $169.99 |
|
|
4″ Dia. x 3″ High Indexable Face Mill Milling Cutter 1 1/2″ Arbor 21 Inserts $109.99 |
|
|
1″ NMTB 40 NMTB40 STUB MILL ARBOR TOOL HOLDER MILLING $58.95 |
|
|
Parlec CAT V-Flange Shell Mill Holder 3/4″ Arbor C40-75SM1 NEW (M3) $99.95 |
|
|
NOS 5/16″ Rohm Drill Chuck for Sherline Lathe with #1 Arbor for Lathe or Mill $34.50 |
|
|
McCrosky USA Shell Reamer mill cutter Arbor adapter tool holder 1.25 shank 40109 $24.50 |
|
|
Ingersoll Max-I-Pex 6X7A04R01 4″ Face Mill 1 1/2″ Arbor 8-New Indexable Inserts $69.99 |
|
|
4″ dia Indexable Face Mill 10 Degree 18 Inserts 1 1/2″ Arbor End Cutter Milling $189.99 |
|
|
Ingersoll 3″ Face Mill Milling Cutter 1 1/4″ Arbor 12 Inserts $59.99 |
|
|
Ingersoll 4″ Face Mill Milling Cutter Indexable 1 1/4″ Arbor 20 Inserts $169.99 |
|
|
Ingersoll 6J1A03R02 75942-D 3″ Face Mill Cutter 1 1/4″ Arbor Milling Indexable $49.99 |
|
|
Dremel EZ406 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit $10.75 EZ Lock, Mandrel Starter Kit, Consists Of: EZ Lock Mandrel & 5 Metal Cutoff Wheels, 1 Piece Mandrel Design Simplifies Changing Accessories, Pull, Twist, Release, Compatible With All Dremel Rotary Tools…. |
|
|
1-1/4 R-8 End Mill Adapter $26.00 For holding end mills in Bridgeport(r) and similar vertical Milling Machines. End mill is held in place by a set screw, providing greater rigidity than collets…. |
|
|
1 1/4 R8 Shell End Mill Arbor $29.00 For Holding shell end mills and indexable face milling cutters in Bridgeport(r) and similar vertical milling machines…. |
|
|
ISO 2940-1:1974, Milling cutters mounted on centring arbors having a 7/24 taper – Fitting dimensions – Centring arbors $48.00 Applies both to cutters with inserted teeth, made from high speed steel or with brazed carbide tips, and to cutters equipped with indexable carbide tips. Concerns milling cutters, arbor located, to be used with a well-defined spindle nose having a 7/24 taper and milling cutter, arbor located, to be used bith spindle nose No. 50 and spindle nose No. 60 having a 7/24 taper. The general fitting dimen… |
|
|
ISO 2940-2:1974, Milling cutters mounted on centring arbors having a 7/24 taper – Inserted tooth cutters $48.00 These cutters are equipped either with high speed steel inserted teeth or with inserted teeth with brazed carbide tips. Concerns milling cutters, arbor located, to be used with a well-defined spindle nose having a 7/24 taper and milling cutter, arbor located, to be used with both spindle nose No. 50 and spindle nose No. 60 having a 7/24 taper. Dimensions for centring arbors and fitting dimensions … |
|
|
ISO 839-1:1976, Milling machine arbors with 7/24 tapers – Part 1: Dimensions $49.00 Applies to a metric series type of milling machine arbors (tables in clause 4) and to a inch series type of milling machine arbors (tables in clause 5). Accessories (spacing collars, bearing collars and clamping nuts) are specified in ISO 839-2… |
|
|
3 Morse Taper 22mm Face Mill / Shell Mill arbor Quality $47.44 |
|
|
Breeched Dam and Old Mill, Ann Arbor, Michigan – 1908 – Historic Photo Print $7.50 |
|
|
1907 Mill and Huron River near Ann Arbor MI postcard $3.95 |
|
|
Cutter arbor for Unimat 3 or Unimat 4 and Compact 5 Milling head $32.83 |
|
|
Stub Milling Machine Arbor 3/4″ Diameter Straight Shank 1 1/4″ Arbor Diameter $65.99 |
|
|
Cincinnati Milling Machine Arbor Support $1,800.00 |
|
|
Cincinnati Milling Machine Arbor Support $1,400.00 |
|
|
Cincinnati Milling Machine Arbor Support Bushing $550.00 |
|
|
NMTB 50 TAPER 1/2″ END MILL HOLDER milling tool arbor $49.00 |
|
|
NMTB 50 TAPER 3/4″ END MILL HOLDER milling tool arbor $49.00 |
|
|
3MT Horizontal Milling Arbor Attachment for Harrison L5 Lathe $34.40 |
|
|
PROTO 2000 HO 52’6 MILL GONDOLA (ANN ARBOR) # 2019 $14.99 |
|
|
PROTO 2000 HO 52’6 MILL GONDOLA (ANN ARBOR) # 2032 $14.99 |
|
|
PROTO 2000 HO 52’6 MILL GONDOLA (ANN ARBOR) # 2058 $14.99 |
|
|
Last USED UNIVERSAL ENGINEERING KWIK SWITCH 300 FACE MILL ARBOR 3/4″ SMA .750″ $39.05 |
|
|
Stub Milling Machine Arbor 3/4″ Diameter Straight Shank 1″ Arbor Diameter $65.99 |
|
|
LOT OF 20-PCS BACK SPOT FACERS- MILL CUTTERS – REVERSE CUTTERS – WITH ARBOR $45.00 |
|
|
LOT OF 12-PCS BACK SPOT FACERS- MILL CUTTERS – REVERSE CUTTERS – WITH ARBOR $40.00 |
|
|
LOT OF 6-PCS – MILL CUTTERS – REVERSE CUTTERS – WITH ARBOR-BACK SPOT FACER $25.00 |
|
|
LOT OF 10-PCS – MILL CUTTERS – REVERSE CUTTERS – WITH ARBOR- BACK SPOT FACER $35.00 |
|
|
LOT OF 13-PCS BACK SPOT FACERS- MILL CUTTERS – REVERSE CUTTERS – WITH ARBOR $46.00 |
|
|
LOT OF 10-PCS BACK SPOT FACERS- MILL CUTTERS – REVERSE CUTTERS – WITH ARBOR $35.00 |
|
|
LOT OF 10-PCS – MILL CUTTERS – REVERSE CUTTERS – WITH ARBOR-BACK SPOT FACER $42.50 |
|
|
SANDVIK VARILOCK 1″ ARBOR SIDE & FACE MILL ADAPTER A391.10-25 63 030 $99.99 |
|
|
SANDVIK VARILOCK 1-1/2″ ARBOR SIDE & FACE MILL ADAPTER A391.10-38 80 030 $99.99 |
