Written by Spindle Nose Lathe
|
|
Spindle Nose Thread Protector Nut for South Bend Lathe 9 10 Hobby Machinist $21.51 |
|
|
Lathe Spindle Nose Thread Protector $20.00 |
|
|
Jacobs Spindle Nose Lathe Collet Chuck Model 91-C6 $350.00 |
|
|
SOUTH BEND 10″ 5C LATHE COLLET DRAWBAR, ADAPTER, 2 SPINDLE NOSE PROTECTOR $50.52 |
|
|
Jacobs spindle nose lathe chuck Model 91-A6 $652.00 |
|
|
South Bend Lathe MT3 to 3C Collet Main Spindle Nose Adapter Sleeve Machinist USA $19.75 |
|
|
Jacobs Spindle Nose Lathe Chuck 91-C6 with Lathe Collets $99.99 |
|
|
Jacobs Spindle Nose Lathe Chuck Model 91-T1 $400.00 |
|
|
Spindle Nose Lathe Chuck, LO, Jacobs, & Collets 1/8-1 3/8 X-313 $799.99 |
|
|
Jacobs spindle nose lathe chuck Model 91-A6 $475.00 |
|
|
Jacobs No 91-A6 Spindle Nose Lathe Chuck American Standard A2 Mount Rubber Flex $245.00 |
|
|
Jacobs Spindle Nose Lathe Chuck L0 Spindle Mount $350.00 |
|
|
Jacobs Rubber Flex Spindle Nose Lathe Chuck L00 Mount $350.00 |
|
|
1/16″ – 1-3/8″ Jacobs Spindle Nose Lathe Chuck L0 Taper $350.00 |
|
|
JACOBS SPINDLE NOSE L-0 LATHE COLLET CHUCK with COLLETS $1,250.00 |
|
|
Hardinge HLV-H Toolroom Lathe Spindle TAPER NOSE $1,099.00 |
|
|
Buck Chuck 12″ 4 Jaw Independent Back Plate D1 D1-4 CNC Lathe Spindle Nose $599.00 |
|
|
CNC or Manual Lathe 5c Spindle Nose Adapter with Threaded End $150.00 |
|
|
Specification for lathe spindle noses and faceplates: [metric units] (BS 4442) … |
|
|
Bolton Tools 20.5×60 Industrial Grade Big Bore High Precision Engine Lathe – Metal Lathe. Width of Bed : 15.3motor : 10 Hp, 220v, 3 Phase. Swing Over Bed: 20 1/2.swing Over Gap: 30.spindle Nose: D1-8 Camlock. Spindle Bore: 3 1/8. $14,582.00 Motor : 10 HP, 220V, 3 Phase. Swing over bed: 20 1/2″ Swing over gap: 30″ Swing over saddle 13″. Distance between center: 60″ Spindle nose: D1-8 camlock Spindle bore: 3 1/8″ Tailstock barrel taper: MT#5 Tailstock barrel travel: 6″ Cross slide travel: 13 3/4″ Compound travel 4 3/4″ Number of speeds: 12. Speed range: 35 – 1600RPM. Range of thread (inch): 40 @1/4-28 TPI. Range of thread(metric): 43 @… |
|
|
Bolton Tools 16 x 60 Industrial Grade Big Bore High Precision Engine Lathe – Metal Lathe. Width of Bed : 15.3. motor : 7.5 Hp, 220v, 3 Phase. Swing Over Bed: 16.swing Over Gap: 25 1/8. spindle Nose: D1-8 Camlock. Spindle Bore: 3 1/8. $13,949.50 Motor : 7 1/2 HP, 220V, 3 Phase. Swing over bed: 16″ Swing over gap: 25 1/8″ Swing over saddle 8 1/2″. Distance between center: 60″ Spindle nose: D1-8 camlock Spindle bore: 3 1/8″ Tailstock barrel taper: MT#5 Tailstock barrel travel: 5 7/8″ Cross slide travel: 11 1/2″ Compound travel 4 3/4″ Number of speeds: 12. Speed range: 35 – 1600RPM. Range of thread (inch): 40 @1/4-28 TPI. Range of thread(met… |
|
|
Royal Products 44000 A2-5 Spindle To A2-6 Chuck Adapter Plate $1,019.00 Adapter plates offer the flexibility to mount collet chucks and 3-jaw chucks to a wider range of spindles. Mount a larger chuck on a smaller spindle for increased capacity. Mount a smaller chuck on a larger spindle for increased tool clearance and higher speeds. Metric screws included for mounting plate to spindle. Drive button is also included. Hardened and ground. Concentricity of 0.0002″ TIR gu… |
