Written by Staggered Tooth
|
|
STAGGERED TOOTH SIDE MILLING CUTTER 6″ x 1/2″ x 1-1/4″ (2 Pcs.) USA $49.95 |
|
|
STAGGERED TOOTH SIDE MILLING CUTTER 5-3/4 x 7/8 x 1-1/4 $34.95 |
|
|
STAGGERED TOOTH SIDE MILLING CUTTER 5-7/8 x 3/4 x 1-1/4 $29.95 |
|
|
Carbide Index Staggered Tooth Woodruff Keyseat Cutter $144.99 |
|
|
NOS HANITA HSS STAGGERED Tooth Horizontal Side & Face Cutter 5″ x 3/8″ x 1″ $38.25 |
|
|
NOS HANITA STAGGERED TOOTH HSS Horizontal Side Face Cutter 5 x 7/16 x 1-1/4″ $40.50 |
|
|
NOS HANITA STAGGERED TOOTH HSS Horizontal Side Face Cutter 5 x 1/2 x 1″ $42.75 |
|
|
NOS HANITA STAGGERED TOOTH HSS Horizontal Side Face Milling Cutter 5″x7/16″ x 1″ $40.50 |
|
|
Horizontal Milling Machine Staggered Tooth Cutter 8” $39.99 |
|
|
2 NOS M35 hss 63mm X 8mm STAGGERED TOOTH Milling Cutter $20.25 |
|
|
2 NOS M35 63mm X 6mm STAGGERED TOOTH Milling Cutter $20.25 |
|
|
STAGGERED TOOTH SIDE MILLING CUTTER 3-3/4″ x 7/8″ x 1-1/4″ (2 Pcs.) USA NEW $49.95 |
|
|
NOS HANITA HSS STAGGERED Tooth Horizontal Side & Face Cutter 5″ x 1/4″ x 1-1/4″ $27.00 |
|
|
NOS HANITA HSS STAGGERED Tooth Horizontal Side & Face Cutter 5″ x 3/8″ x 1-1/4″ $27.00 |
|
|
NOS HANITA STAGGERED TOOTH HSS Horizontal Side Face Cutter 5″ x 5/16″ x 1-1/4″ $31.50 |
|
|
Import 3″ x 13/16″ x 1-1/4″ HSS Spiral Staggered 16 Tooth Side Milling Cutter $147.06 |
|
|
NEW SURPLUS NIAGARA HSS STAGGERED TOOTH CUTTER 3-1/2″x1/2″x1-1/4″ USA TiN $38.15 |
|
|
MILLING CUTTERS, 6 PC. LOT, REGROUND, HSS, STAGGERED TOOTH, U.S.A. $44.99 |
|
|
MILLING CUTTERS, 6 PC. LOT, REGROUND, HSS, STAGGERED TOOTH, ALL U.S.A. $44.99 |
|
|
MILLING CUTTERS, 6 PC. LOT, REGROUND, HSS, STAGGERED TOOTH, U.S.A. BRANDS $44.99 |
|
|
MILLING CUTTERS, 6 PC. LOT, REGROUND, HSS, STAGGERED TOOTH, TOP US BRANDS $44.99 |
|
|
MILLING CUTTERS, 6 PC. LOT, REGROUND, HSS, STAGGERED TOOTH, ALL MADE IN U.S.A. $44.99 |
|
|
MILLING CUTTERS, 3 PC. LOT, REGROUND, HSS, STAGGERED TOOTH, ALL MADE IN U.S.A. $24.99 |
|
|
STAGGERED ROUNDED TEETH TOOTH PLAIN MILLING CUTTER 16T 2-7/8″ x 1-1/2″ x 1″ $44.95 |
|
|
Niagara 2 1/8″x3/8″ Staggered Tooth Side Mill Cutter $25.49 |
|
|
NIAGARA CUTTER 01760 STAGGERED TOOTH SIDE MILL CUTTER $322.49 |
|
|
SIDE MILLING CUTTER STAGGERED TOOTH 8 X 7/8 X 1-1/4 HSS $515.99 |
|
|
Tuff Stuff Starter Full Size Black Staggered 168-Tooth Flywheel/Flexplate SBC. $137.90 |
|
|
Niagara Cutter Staggered Tooth Side Mill $100.00 |
|
|
Niagara Cutter Staggered Tooth Side Mill $150.00 |
|
|
Staggered Tooth Side Mill 6″ x 5/16″ x 1-1/4″ NEW (AG2) $49.95 |
|
|
6X 1/2 STAGGERED CARBIDE TOOTH SIDE CUTTING MILL,1 1/4″BORE $38.00 |
|
|
Niagara 4”x ½” Staggered Tooth Side Mill Cutter $41.65 |
|
|
Side Miller Cutter, Staggered Tooth, 8 x 3/4 x 1 1/2 $200.00 |
|
|
CARBIDE TIPPED SIDE MILL CUTTER FOR STEEL STAGGERED TOOTH 6×3/4×1-1/4″ USA NEW $115.00 |
|
|
IMPORT 3″ x 7/16″ x 1″ HSS-E Staggered Tooth Side Milling Cutter 5D $64.95 |
|
|
BOSCH ROUTER BIT #85408M 5/8″ PILOT PANEL BIT-STAGGERED TOOTH–1/2″ SHANK $14.99 |
|
|
BOSCH ROUTER BIT # 85291M 3/8″ STRAIGHT CUT BIT– STAGGERED TOOTH-( 3/8″ SHANK) $9.99 |
|
|
1-7/8″ STAGGERED TOOTH FACE & END MILL MILLING CUTTER $34.95 |
|
|
NOS HANITA STAGGERED TOOTH HSS Horizontal Side Face Cutter 5 x 3/16 x 1-1/4″ $40.50 |
|
|
NEW NIAGARA STAGGERED TOOTH CUTTER 8″ x 3/16″ X 1-1/4″ USA $131.75 |
|
|
Poland 3″ x 1/2″ x 1″ HSS Staggered Tooth Milling Cutter $33.15 |
|
|
4 pc Niagara Cutter HSS Staggered Tooth Side Mill 4-1/2″ x 7/8″ x 2″ O650 $149.99 |
|
|
Import 4 X 5/32 X 1 Staggered Side Tooth Saw $101.17 |
|
|
3″ x 5/32″ x 1″ HSS Staggered Tooth Slitting Saw NEW! $31.99 |
|
|
5×3/4×1 1/4 STAGGERED TOOTH SIDE MILLING CUTTERS $66.99 |
|
|
3 3/8″ x .546 x 1″ HSS Staggered Tooth Slitting Saw $31.99 |
|
|
3 1/2″ x 3/8″ x 1″ HSS Staggered Tooth Slitting Saw NEW $77.99 |
|
|
1 UTD STAGGERED TOOTH SLOTTING BLADE 8 X 3/8 X 1-1/2 $40.00 |
|
|
HIGH TORQUE MINI STARTER CHEVY NEW STAGGERED 168 TOOTH $166.95 |
|
|
CRL 3-3/8 Diameter 80 Tooth Kett Panel Saw Blade for Cutting Plastic by CR Laurence $17.98 High-Speed Steel Black Oxide Finish CRL Kett Saw Blades are made from the finest high-speed steel. These Blades are hardened to cut mild steel, plastics, aluminum, fiberglass and other sheet material. 3/32″ (2.4 mm) thick with a staggered set tooth which cuts an approximate 3/64″ (1 mm) ker for slot. 7/16″ (11 mm) bore. Black oxide finish on standard black blade…. |
|
|
Amana 51324 Opposite-Shear Staggered Tooth Router Bits – 1/2 Cutting Diameter; 2 Cutting Height $29.05 A stagger-tooth bit has two cutting edges, each only half the flute length, located 180° apart, one high, one low. The result is a tool that combines the speed and chip clearance of a one-flute bit with the strength and balance of a two-flute bit. This ?opposite-shear? configuration features a down-shear edge and an up-shear edge. On a through-cut, it shears down on both surfaces at the same time… |
|
|
Made in USA Staggered Tooth 1/4 Carb. Tpd. T-slot Cutter Slot – Cutters Bolt Size: 1/4 Type: Standard Cutter Diameter: 9/16 Cut Width: 15/64 Material: Carbide Tipped… |
|
|
Chevy 305 350 454 Mini Racing PMGR Starter HT PM300 $60.00 SUPER TORQUE HIGH PERFORMANCE CHEVYFACTORY NEW MINI PMGR STARTER! Complete with shims and bolts at no extra charge!Super Torque Aftermarket Mini Starter Delco PG260M Style 1.7KW – 12 Volt, CW Permanent magnet gear reduction high torque racing design will easily start up to 18:1 high compression engines. Staggered bolt pattern for easy mounting on Chevy engines.Fits the 168 tooth flywheelFits almo… |
|
|
High Torque Mini PMGR Starter Chevy Big & Small Block 305 350 454 168 Tooth Flywheel $78.45 MAXIMUM HIGH TORQUE 3 HP MINI STARTER FOR CHEVY, GMC, CADILLAC Includes bolts & shims! This is a PERMENANT MAGNET GEAR REDUCTION (PMGR) starter. PMGR starters crank faster and with less battery drain. When replacing your old starter you will notice a vast difference in cranking performance! Incredibly light weight — less than 8 pounds! PMGR racing design will start up to 18:1 high compression eng… |
|
|
CVR Performance 5323OS Staggered 153 and 168 Tooth Protorque Starter for Chevy $199.99 CVR Performance 5323OS CHEVY PROTORQUE STARTER…. |
|
|
HAIR WARE Tail Teasing Comb (Pack of 12) (Model: HW0021) $9.95 Staggered teeth adds body, fullness and lift to the hair. 8.5″… |
|
|
STAGGERED TOOTH SIDE MILLING CUTTER 6″ x 1/2″ x 1-1/4″ (2 Pcs.) USA $49.95 |
|
|
STAGGERED TOOTH SIDE MILLING CUTTER 5-3/4 x 7/8 x 1-1/4 $34.95 |
|
|
STAGGERED TOOTH SIDE MILLING CUTTER 5-7/8 x 3/4 x 1-1/4 $29.95 |
|
|
Carbide Index Staggered Tooth Woodruff Keyseat Cutter $144.99 |
|
|
NOS HANITA HSS STAGGERED Tooth Horizontal Side & Face Cutter 5″ x 3/8″ x 1″ $38.25 |
|
|
NOS HANITA STAGGERED TOOTH HSS Horizontal Side Face Cutter 5 x 7/16 x 1-1/4″ $40.50 |
|
|
NOS HANITA STAGGERED TOOTH HSS Horizontal Side Face Cutter 5 x 1/2 x 1″ $42.75 |
|
|
NOS HANITA STAGGERED TOOTH HSS Horizontal Side Face Milling Cutter 5″x7/16″ x 1″ $40.50 |
|
|
Horizontal Milling Machine Staggered Tooth Cutter 8” $39.99 |
|
|
2 NOS M35 hss 63mm X 8mm STAGGERED TOOTH Milling Cutter $20.25 |
|
|
2 NOS M35 63mm X 6mm STAGGERED TOOTH Milling Cutter $20.25 |
|
|
STAGGERED TOOTH SIDE MILLING CUTTER 3-3/4″ x 7/8″ x 1-1/4″ (2 Pcs.) USA NEW $49.95 |
|
|
NOS HANITA HSS STAGGERED Tooth Horizontal Side & Face Cutter 5″ x 1/4″ x 1-1/4″ $27.00 |
|
|
NOS HANITA HSS STAGGERED Tooth Horizontal Side & Face Cutter 5″ x 3/8″ x 1-1/4″ $27.00 |
|
|
NOS HANITA STAGGERED TOOTH HSS Horizontal Side Face Cutter 5″ x 5/16″ x 1-1/4″ $31.50 |
|
|
Import 3″ x 13/16″ x 1-1/4″ HSS Spiral Staggered 16 Tooth Side Milling Cutter $147.06 |
|
|
NEW SURPLUS NIAGARA HSS STAGGERED TOOTH CUTTER 3-1/2″x1/2″x1-1/4″ USA TiN $38.15 |
|
|
MILLING CUTTERS, 6 PC. LOT, REGROUND, HSS, STAGGERED TOOTH, U.S.A. $44.99 |
|
|
MILLING CUTTERS, 6 PC. LOT, REGROUND, HSS, STAGGERED TOOTH, ALL U.S.A. $44.99 |
|
|
MILLING CUTTERS, 6 PC. LOT, REGROUND, HSS, STAGGERED TOOTH, U.S.A. BRANDS $44.99 |
|
|
MILLING CUTTERS, 6 PC. LOT, REGROUND, HSS, STAGGERED TOOTH, TOP US BRANDS $44.99 |
|
|
MILLING CUTTERS, 6 PC. LOT, REGROUND, HSS, STAGGERED TOOTH, ALL MADE IN U.S.A. $44.99 |
|
|
MILLING CUTTERS, 3 PC. LOT, REGROUND, HSS, STAGGERED TOOTH, ALL MADE IN U.S.A. $24.99 |
|
|
STAGGERED ROUNDED TEETH TOOTH PLAIN MILLING CUTTER 16T 2-7/8″ x 1-1/2″ x 1″ $44.95 |
|
|
Niagara 2 1/8″x3/8″ Staggered Tooth Side Mill Cutter $25.49 |
