Written by Tialn Coated
|
|
NEW #26 (.147) TIALN COATED HERTEL COBALT JOBBER DRILL $1.99 |
|
|
3/4″ 4FL Regular, 0.030″ Radius, TIALN Coated Solid Carbide Endmill $113.05 |
|
|
3/4″ 4FL Regular, 0.060″ Radius, TIALN Coated Solid Carbide Endmill $113.05 |
|
|
3/4″ 4FL Regular, 0.125″ Radius, TIALN Coated Solid Carbide Endmill $113.05 |
|
|
3/4″ 4FL Regular, 0.250″ Radius, TIALN Coated Solid Carbide Endmill $113.05 |
|
|
NEW #31 “(.120) TIALN COATED HERTEL COBALT TAPER LENGTH DRILL $3.99 |
|
|
NEW 3/16 (.1875) TIALN COATED HERTEL COBALT JOBBER DRILL $1.99 |
|
|
Niagara Cutter 3/4″ Carbide TiALN Coated .120 Radius End Mill $49.00 |
|
|
NEW #15 (.180) TIALN COATED HERTEL COBALT JOBBER DRILL $1.99 |
|
|
NEW #2 (.221) TIALN COATED HERTEL COBALT TAPER LENGTH DRILL $3.99 |
|
|
NEW 2mm (.0787) TIALN COATED HERTEL COBALT JOBBER DRILL $3.99 |
|
|
NEW 12.50 mm (.4921) TIALN COATED HERTEL COBALT JOBBER DRILL $7.99 |
|
|
NEW #5 (.205) TIALN COATED HERTEL COBALT TAPER LENGTH DRILL $3.99 |
|
|
KEO 1/32″ 3 FLUTE LONG REACH CARBIDE END MILL 87012-TiALN Coated USA NEW $22.25 |
|
|
PTD Precision Twist Drill number 14 #14 Carbide Stub Length TIALN Coated 005614 $35.16 |
|
|
Lot of 10 YG Solid Carbide 1/4″ TiALN Coated 4 Flute End Mills NEW $129.99 |
|
|
QUALITY 3/8-20, 5/16″ Shank Carbide Thread Mill Straight Flute 4FL TiALN Coated $77.53 |
|
|
new QUALITY 10-32, 3/16″ Shank Carbide Straight Flute Thread Mill TiALN Coated $51.51 |
|
|
new QUALITY 8-32, 1/8″ Shank Carbide Straight Flute Thread Mill TiALN Coated $49.95 |
|
|
new QUALITY 8-36, 1/8″ Shank Carbide Straight Flute Thread Mill TiALN Coated $49.95 |
|
|
new QUALITY 6-32, 1/8″ Shank Carbide Straight Flute Thread Mill TiALN Coated $49.95 |
|
|
new QUALITY 6-32 x 1/8″ Shank Solid Carbide Router Bit TiALN Coated 2FL $38.21 |
|
|
KEO 7/64″ 3 FLUTE Long Reach CARBIDE END MILL 87017-TiALN Coated USA NEW $16.65 |
|
|
NIAGARA 1/2 R.125 4FLT CARBIDE ENDMILL TIALN COATED 85610-125 BULLNOSE $42.00 |
|
|
New 1/4″ CARBIDE END MILL 4FL TIALN COATED x-long $8.99 |
|
|
NEW #19 (.166) TIALN COATED HERTEL COBALT JOBBER DRILL $1.99 |
|
|
Hanita Widia Solid Carbide End Mill 4 Flute 1”x1”x2”x5” R.125 TIALN Coated New $199.00 |
|
|
NEW OSG CARBIDE BALL END MILL 22MM X 22MM TIALN COATED! $55.00 |
|
|
1/8″ 4-FLUTE CARBIDE END MILL TiALN COATED USA MADE #206-001067 10 PIECES. $109.00 |
|
|
MORSE CARBIDE DRILL 1/4″ DIA 2 FLUTE TiALN COATED $30.00 |
|
|
MORSE CARBIDE DRILL 3/16 DIA. TiALN COATED $15.00 |
|
|
MORSE CARBIDE DRILL 1/8 DIA. TiALN COATED $10.00 |
|
|
MORSE CARBIDE DRILL 3/32 DIA TiALN COATED $10.00 |
|
|
3/16″ 4-FLUTE CARBIDE END MILL TiALN COATED USA MADE #206-001107 10 PIECES. $116.10 |
|
|
3/16″ CARBIDE STRAIGHT FLUTE DRILLS (10 PCS) TiALN COATED USA MADE 470-101875B $132.80 |
|
|
1/4″ 4-FLUTE CARBIDE END MILL TiALN COATED USA MADE #206-001137 10 PIECES. $131.00 |
|
|
5/16″ 4-FLUTE CARBIDE END MILL TiALN COATED USA MADE #206-001153 10 PIECES. $185.20 |
|
|
3/8″ 4-FLUTE CARBIDE END MILL TiALN COATED USA MADE #206-001177 10 PIECES. $227.20 |
|
|
1/2″ 4-FLUTE CARBIDE END MILL TiALN COATED USA MADE #206-001203A 5 PIECES. $188.85 |
|
|
1/2″ 4-FLUTE CARBIDE END MILL TiALN COATED USA MADE #206-001207 5 PIECES. $201.10 |
|
|
5/8″ 4-FLUTE CARBIDE END MILL TiALN COATED USA MADE #206-001226 1 PIECE. $60.81 |
|
|
3/4″ 4-FLUTE CARBIDE END MILL TiALN COATED USA MADE #206-001244 1 PIECE. $92.78 |
|
|
1″ 4-FLUTE CARBIDE END MILL TiALN COATED USA MADE #206-001264 1 PIECE. $143.34 |
|
|
New 1/8 ” CARBIDE end mills 4 flutes tialn coated $5.99 |
|
|
NEW 15/64″(.2344) TIALN COATED HERTEL COBALT TAPER LENGTH DRILL $3.99 |
|
|
NEW 17/64″(.2656) TIALN COATED HERTEL COBALT TAPER LENGTH DRILL $3.99 |
|
|
SOLID CARBIDE DRILL “Q” (.332″) COOLANT THRU TIALN COATED OSG EXOCARB MAX NEW $42.00 |
|
|
Niagara Cutter 07044 TiALN Coated Single Endmill R$457 $267.99 |
|
|
1/8″ – 4 FLUTE 90° CARBIDE DRILL MILL TIALN COATED – USA MADE 208-420125 $12.51 |
|
|
1/4″ – 4 FLUTE 90° CARBIDE DRILL MILL TIALN COATED – USA MADE 208-420250 $21.60 |
|
|
Niagara Cutter CB430 Carbide End Mill, General Purpose, TiAlN Coated, 4 Flutes, Ball End, 1/8 Cutting Length, 1/16 Cutting Diameter $11.69 The Niagara Cutter CB430 TiAlN-coated carbide ball nose end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tool’s ball nose creates contoured surfaces where sharp corners are not required, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Four flutes produc… |
|
|
Niagara Cutter C330 Carbide End Mill, General Purpose, TiAlN Coated, 3 Flutes, Square End, 1/2 Cutting Length, 1/8 Cutting Diameter $10.59 The Niagara Cutter C330 TiAlN-coated carbide square nose end mill has three flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tool’s square end creates sharp, unrounded cuts, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The end mill’s three flutes provide better chip-car… |
|
|
Niagara Cutter REC700 Cobalt Steel End Mill, Coarse-Pitch Rougher, TiAlN Coated, 4 Flutes, Chamfer End, 2-1/2 Cutting Length, 1/2 Cutting Diameter $54.43 The Niagara Cutter REC700 TiAlN-coated cobalt steel coarse-pitch rougher end mill has a 30-degree helix and is suitable for machining mild and cold-rolled steels. The number of flutes varies by diameter to optimize the feed and cut rate. The coarse-pitch tooth design has chip-breaking cutting edges that remove more material in less time than conventional end mills to support heavier cuts at high… |
|
|
NEW #26 (.147) TIALN COATED HERTEL COBALT JOBBER DRILL $1.99 |
|
|
3/4″ 4FL Regular, 0.030″ Radius, TIALN Coated Solid Carbide Endmill $113.05 |
|
|
3/4″ 4FL Regular, 0.060″ Radius, TIALN Coated Solid Carbide Endmill $113.05 |
|
|
3/4″ 4FL Regular, 0.125″ Radius, TIALN Coated Solid Carbide Endmill $113.05 |
|
|
3/4″ 4FL Regular, 0.250″ Radius, TIALN Coated Solid Carbide Endmill $113.05 |
|
|
NEW #31 “(.120) TIALN COATED HERTEL COBALT TAPER LENGTH DRILL $3.99 |
|
|
NEW 3/16 (.1875) TIALN COATED HERTEL COBALT JOBBER DRILL $1.99 |
|
|
Niagara Cutter 3/4″ Carbide TiALN Coated .120 Radius End Mill $49.00 |
|
|
NEW #15 (.180) TIALN COATED HERTEL COBALT JOBBER DRILL $1.99 |
|
|
NEW #2 (.221) TIALN COATED HERTEL COBALT TAPER LENGTH DRILL $3.99 |
|
|
NEW 2mm (.0787) TIALN COATED HERTEL COBALT JOBBER DRILL $3.99 |
|
|
NEW 12.50 mm (.4921) TIALN COATED HERTEL COBALT JOBBER DRILL $7.99 |
|
|
NEW #5 (.205) TIALN COATED HERTEL COBALT TAPER LENGTH DRILL $3.99 |
|
|
KEO 1/32″ 3 FLUTE LONG REACH CARBIDE END MILL 87012-TiALN Coated USA NEW $22.25 |
|
|
PTD Precision Twist Drill number 14 #14 Carbide Stub Length TIALN Coated 005614 $35.16 |
|
|
Lot of 10 YG Solid Carbide 1/4″ TiALN Coated 4 Flute End Mills NEW $129.99 |
|
|
QUALITY 3/8-20, 5/16″ Shank Carbide Thread Mill Straight Flute 4FL TiALN Coated $77.53 |
|
|
new QUALITY 10-32, 3/16″ Shank Carbide Straight Flute Thread Mill TiALN Coated $51.51 |
|
|
new QUALITY 8-32, 1/8″ Shank Carbide Straight Flute Thread Mill TiALN Coated $49.95 |
|
|
new QUALITY 8-36, 1/8″ Shank Carbide Straight Flute Thread Mill TiALN Coated $49.95 |
|
|
new QUALITY 6-32, 1/8″ Shank Carbide Straight Flute Thread Mill TiALN Coated $49.95 |
|
|
new QUALITY 6-32 x 1/8″ Shank Solid Carbide Router Bit TiALN Coated 2FL $38.21 |
|
|
KEO 7/64″ 3 FLUTE Long Reach CARBIDE END MILL 87017-TiALN Coated USA NEW $16.65 |
|
|
NIAGARA 1/2 R.125 4FLT CARBIDE ENDMILL TIALN COATED 85610-125 BULLNOSE $42.00 |
|
|
New 1/4″ CARBIDE END MILL 4FL TIALN COATED x-long $8.99 |
